Echo Bender
A year ago I built a effect pedal based on the Echo Bender by Casper Electronics. The schematic can be found here and an Instructable of an Echo Bender clone can be found here. On those sites you can also find videos to get an idea on how the Echo Bender sounds. First I built the whole pedal based on the schematic from above on a breadboard to see how and if it works.
Then I designed a strip-board as following and soldered everything together: 
Today, after one year, I finally found some time and some “trash” to build the housing. The housing basically consists of an old case for a film roll and three cork bungs.
Marcel Schmidt 
